Xerox WorkCentre 5755 System Administrator Manual page 134

Network Installation
b. Physical Connection displays the physical network connection, this will always display
"Ethernet".
5. Up to three ports may be enabled and configured, in the Port Information area:
a. For Port 1 Leave the [TCP Port Number] set to 9100. If two additional ports are available,
click on [Default All] to see if they set to 9101 and 9102 respectively (emulating HP JetDirect
EX Plus 3).
b. Leave the Bidirectional checkboxes and Maximum Connections per Port settings at their
default values.
c. Set the End of Job Timeout to the number of seconds to wait before processing a job
without an End Of Job indicator. The range is from 1 to 65535, and the default is 300.
d. Leave the PDL Switching, [Enabled] checkbox at its default value.
Note: Do not check the [Enabled] checkbox for PDL Switching, when Windows clients print using
port 9100. this prevents each print job from generating a banner page.
6. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values, or [Default All] to enter printer defaults for all settings (recommended).
7. Click on the [OK] button when you see the message "Properties have been successfully
modified".
Note: The settings are not applied until you restart the device.
8. Click on the [Status] tab, select [Description & Alerts] in the directory tree.
9. Click on the [Reboot Machine] button and click on [OK] to reboot the machine. The network
controller takes approximately 5 minutes to reboot and network connectivity will be unavailable
during this time.
Installing CUPS on the UNIX workstation
The instructions for installing and building CUPS are contained in the CUPS Software Administrators
Manual, written and copyrighted by Easy Software Products and available for downloading at:
www.cups.org/documentation.php.
An Overview of the Common UNIX Printing System, Version 1.1, and a wide range of other descriptive
documentation, is also available at this site.
The binary distribution of CUPS is available in tar format with installation and removal scripts, as well
as in rpm and dpkg formats for RedHat and Debian versions of Linux. After logging into the
workstation as root (su) and downloading the appropriate files to the root directory, the installation
begins as follows:
Tar format:
After untarring the files, run the installation script with the ./cups.install (and press Enter).
RPM format:
rpm -e lpr
rpm -i cups-1.1-linux-M.m.n-intel.rpm (and press Enter).
126 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide