Xerox WorkCentre 5755 System Administrator Manual page 157

4. In the Where is the Information Located? area select [Remotely on the Network] from the
drop-down menu for Device User Interface Authentication and click on the [Save] button to
return to the Authentication Configuration page.
Note: Make sure that the NetWare protocol has been enabled per the instructions contained in
this guide in the Network Installation section. For NDS you will need to supply the NDS tree and
context.
5. In the Current Configuration area, click on the [Configure]/[Edit] button for Authentication
Server.
6. In the Authentication Server page, select [NDS (Novell)] from the Authentication Type drop-
down menu, and click on the [Add New] button.
7. In the Default Tree/Context (Required) area:
a. Enter details in the [NDS Tree] and [NDS Context] fields.
b. Click on the [Add Server] button to save the settings and return to the Authentication
Server page.
c. Click on the [Save] button to return to the Authentication Configuration page.
8. To set Authentication to control access to individual Services, in the Current Configuration area,
click on the [Edit] button for Access Setup Wizard.
a. On the Device Access page, in the Pathway Access area, select either [Unlocked] or
[Locked] for the following options:
• Services Pathway
• Job Status Pathway
• Machine Status Pathway
b. Click on the [Next] button; the Service Access page displays. To set Authentication to control
access to individual Features, select individual feature radio button for the following
authentication access:
• Unlocked
• Locked
• Hidden
Click on the [Next] button to return to the Authentication Configuration screen.
9.
10. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.
Authentication Configuration for SMB (Windows NT4) and SMB (Windows
2000/2003/2008)
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Security] link.
2. Select [Authentication Configuration] in the directory tree.
3. The Authentication Configuration page displays. In the Current Configuration area click on the
[Edit Methods]/[Configure] button for Authentication.
4. In the Where is the Information Located? area select [Remotely on the Network] from the
drop-down menu for Device User Interface Authentication and click on the [Save] button to
return to the Authentication Configuration page.
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Authentication
on page 16.
System Administrator Guide
149