Xerox WorkCentre 5755 System Administrator Manual page 155

b. Click on the [Next] button; the Service Access page displays. To set Authentication to control
access to individual Features, select individual feature radio button for the following
authentication access:
• Unlocked
• Locked
• Hidden
12. Click on the [Next] button to return to the Authentication Configuration screen.
13. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.
Authentication Configuration for Kerberos (Windows 2000/2003)
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Security] link.
2. Select [Authentication Configuration] in the directory tree.
3. The Authentication Configuration page displays. In the Current Configuration area click on the
[Edit Methods]/[Configure] button for Authentication.
4. In the Where is the Information Located? area select [Remotely on the Network] from the
drop-down menu for Device User Interface Authentication and click on the [Save] button to
return to the Authentication Configuration page.
5. In the Current Configuration area, click on the [Edit] or [Configure] button for Authentication
Server.
6. In the Authentication Server page, select [Kerberos (Windows 2000/2003)] from the
Authentication Type drop-down menu. and click on the [Add New] button.
7. In the Server Information area:
a. Enter details in the [Domain] field.
b. Select either [IPv4 Address], [IPv6 Address] or [Host Name] button.
If IPv4 or IPv6 Address is selected, enter details in the [IP Address: Port] and [Backup IP
c.
Address: Port] field.
d. If Host Name is selected, enter details in the [Host Name: Port] and [Backup Host Name:
Port] field.
8. In the Optional Information area, if required, you can indicate which LDAP server should be used
to acquire authorization and personalization data when authenticating to the server.
a. Click on the [Add LDAP Mapping] button; the LDAP page displays. To configure LDAP server,
click the [Edit] link or to add a new LDAP server click on the [Add New] button.
b. The LDAP: Server page displays. For details on how to configure this option refer to
page 103.
c. When you have configured the feature, click on the [Save] button.
d. Click on the [Add Mapping] button to return to the Add Authentication Server page.
9. Click on the [Add Server] button to save the settings and return to the Authentication Server
page.
10. Click on the [Save] button to return to the Authentication Configuration page.
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Authentication
on page 16.
System Administrator Guide
LDAP on
147