Smtp (Simple Mail Transfer Protocol) - Xerox WorkCentre 5755 System Administrator Manual

9. In the Job Boundary Determination area:
a. For End of Job Timeout, enter the required time between 0 and 1800, for the device to wait
for the data received through the port before terminating the job.
b. For Control D Marks End of PostScript Job, check the [Enabled] checkbox, when enabled,
the "Ctrl-d" character indicates the end of a PostScript print job.
10. In the Backchannel Data area:
a. For Backchannel Data Transmission to Client, check the [Enabled] checkbox to allow
backchannel information to transmit back to the client, such as PDL interpreter and PJL status
messages.
b. For Out of Order Backchannel Data, check the [Enabled] checkbox to allow bidirectional
information from multiple print jobs to return to the client out of order. This option also
ensures communication between the printer and client.
11. In the Banner Page Printing area:
a. For Banner Page Enabled, from the drop-down menu, select one of the following to allow
banner sheets to print:
• No Jobs
• First Jobs Only
• All Jobs
b. If required, for Banner Page for Each Document of Job, check the [Enabled] checkbox to
generate a banner page for each document in a job. This only applies to PDL switched PJL
jobs. When disabled, banner sheet is printed for the first document only.
c. For Banner Page for Job Containing only PJL Commands, check the [Enabled] checkbox, to
allow banner pages to print only for jobs that are specifically requested through PJL
commands.
12. In the Miscellaneous area:
a. For Language (PDL) Switching within PJL Job, check the [Enabled] checkbox to allow the
port handle PJL print jobs consisting of more than one language, for example PCL and
PostScript. Each language is spooled as a separate document which creates a multiple
document job.
b. If required, for Job Data Parsing Override, check the [Enabled] checkbox to force the parsing
job data. Job data is not parsed when bidirectional and PDL switching are disabled.
13. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values, or [Default All] to enter printer defaults for all settings (recommended).
14. Click on the [OK] button when you see the message "Properties have been successfully
modified".

SMTP (Simple Mail Transfer Protocol)

The SMTP (Simple Mail Transfer Protocol) page allows you to configure this option, This is required for
E-mail and Internet Fax features. E-mail and Internet Fax features use the same SMTP information for
outgoing jobs.
To configure this feature or these settings access the Properties tab as a System
Note:
Administrator. For details, refer to
1. From the Properties tab, click the [Connectivity] link.
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Network Installation
on page 16.
System Administrator Guide
101