Xerox WorkCentre 5755 System Administrator Manual page 112

Network Installation
d. Select the server type from the [LDAP Server] drop-down menu.
6. In the Optional Information area:
a. Enter the search directory location of the server where the LDAP information is stored in the
[Search Directory Root] field.
b. For Login Credentials to Access LDAP Server, select one of the following:
• None - If no login is required.
• Authenticated User - The device will use the login details entered by the user to access
the LDAP server. This option requires Authentication to be configured on the device.
• System - If selected the device will specify the LDAP server login details and enter the
required information in the [Login Name] and [Password] fields. Format for the login
name may be login name or domain/login name.
c. Enter a Login Name and Password, if required, for the device to access the LDAP server.
Format for the login name may be login name or domain/login name.
d. For SSL, check the following checkbox:
• Enable SSL - To enable SSL (Secure Socket Layer).
Note: SSL requires a server certificate to be available to the device.
• Validate Repository SSL Certificate - If you want the device to verify that the server
certificate is trusted, valid and has a fully qualified domain name (FQDN).
e. Click on the [View Trusted SSL Certificates] link to view secure certificates that have been
uploaded to the device. (Click the browser [Back] button to return to the LDAP Settings
screen).
f. For Maximum Number of Search Results select either [Use LDAP Server Maximum] or
[Maximum Number of Search Results]. If you select the latter, enter the maximum number
of addresses that will appear which match the search criteria selected by the user. Set the
search results to one less than the server will allow. For example, if the LDAP server limit is 75,
set the search results to 74 or less. The range is between 5 and 100.
g. Search Timeout: There are two options. You can let the server use its timeout limit by
selecting the [Use LDAP Server Timeout], or select [Wait] and specify how many seconds
the search should last (between 5 and 100). If the search takes longer than the time specified
in the [Wait... seconds] box the user will be notified that the search failed.
h. For LDAP Referrals, check the [Enabled] checkbox if the primary LDAP server is connected to
additional servers, the search will continue on those servers as well.
i. The Perform Query on option will help control the returns by allowing the LDAP query to be
either on [Mapped Name Field] or [Surname and Given Name Fields]. Netscape and Lotus
Domino will typically require a setting of Surname to allow returns of "lastname, firstname".
7. Click on the [Save] button to implement the changes.
To Figure Contexts for LDAP
1. From the LDAP screen, click on the [Contexts] tab under the LDAP title at the top of the screen.
Contexts are used with the Authentication feature. Contexts speeds up searching through the
LDAP tree by specifying where to look in the tree. The administrator can configure the device to
automatically add an authentication context to the Login Name provided by a user.
104 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide