Xerox WorkCentre 5755 System Administrator Manual page 328

Xerox Secure Access
Kerberos, NDS, SMB, and LDAP/LDAPS are contained in the Network Authentication section of this
guide.
The path to the Authentication Server configuration screen is:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Security] link.
2. Select [Authentication Configuration] in the directory tree.
3. The Authentication Configuration page displays. In the Current Configuration area click on the
[Edit Methods]/[Configure] button for Authentication.
4. In the Where is the information located? area, select [Xerox Secure Access] from the drop-down
menu for Device User Interface Authentication, and select [Remotely on the Network] from the
drop-down menu for Web User Interface Authentication. Click on the [Save] button to return to
the Authentication Configuration page.
5. In the Current Configuration area, click on the [Configure] or [Edit] button for Web User
Interface Authentication.
6. Follow the instructions to select the required Authentication Type from the drop-down menu.
• See Authentication Configuration for Kerberos (Solaris)
• See Authentication Configuration for Kerberos (Windows 2000/2003)
• See Authentication Configuration for NDS (Novell)
• See Authentication Configuration for SMB (Windows NT4) and SMB (Windows
2000/2003/2008)
• See Authentication Configuration for LDAP/LDAPS
7. When you have configured the required Authentication Type, click on the [Save] button to return
to the Authentication Configuration page.
Configure your LDAP Server
Configure LDAP communications on the device as stated in the LDAP/LDAPS topic. Refer to
Authentication Configuration for LDAP/LDAPS
8. To set Authentication to control access to individual Services, in the Current Configuration area,
click on the [Edit] button for Access Setup Wizard.
a. On the Device Access page, in the Pathway Access area, select either [Unlocked] or
[Locked] for the following options:
• Service Pathway
• Job Status Pathway
• Machine Status Pathway
b. Click on the [Next] button. The Service Access page displays. To set Authentication to
control access to individual Features, select individual feature radio button for the following
authentication access:
• Unlocked
• Locked
• Hidden
9. Click on the [Next] button to return to the Authentication Configuration screen.
320 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Internet Services as System Administrator
on page 149.
on page 150.
on page 146.
on page 147.
on page 148.
on page 150.
on page 16.