Douwe Egberts Cafitesse 100 Service Manual page 92

Service Manual Cafitesse 100
1
Fig. 1
Floater washer and floater wire
Disassembly:
• Dismount the boiler cover (1). (Fig. 1)
(see chap. 5A.2)
• Unhinge the floater wire (2) at the float
switch. (Fig. 1)
• Compress the floater wire (2) at the bottom
by means of a pair of nippers. (Fig. 1)
• Pull the floater washer (3) over the floater
wire (2). (Fig. 1)
• Again compress the floater wire (2) at the
bottom and guide it through the opening in
the boiler cover towards the top. (Fig. 1)
5A - 10
Functions - Water System
2
3
Assembly:
• Assembly is done in the reverse order.
When mounting the floater washer (3)
make sure that the bottom part of the
floater wire (2) is bent approx. 0.5 cm
(0.20 inches) apart. (Fig. 2)
Fig. 2
2
3
07.2004