Service Manual Cafitesse 100
•
Slightly loosen the screws (1) of the
thermostat holder. (Fig. 11)
•
Slide the pre-mounted support of the
rectifier (2) underneath the lock washers,
and fasten the screws (1). (Fig. 12)
•
Disconnect the plug connection S05/A (3)
from the main cable harness of the dry
running protection. (Fig. 13)
•
Remove the cable binder from the main
cable harness and pull the plug connection
S05/A to the rear of the dispenser.
•
Disconnect the plug connection S06/2 (4) of
the main cable harness from the thermos-
tat. (Fig. 13)
•
Connect the plug adapter (D-0258) to the
free thermostat contact.
•
Connect the plug connections S06/2 of the
main cable harness and E01/B of the cable
harness switch (G-4973) to the plug
adapter.
•
Connect the plug connection S05/A of the
cable harness switch (G-4973) to the free
dry running protection contact.
•
Turn the thermostat clockwise up to the
stop of the maximum temperature 95°C.
(Heating on)
07.2004
Functions - Water System
1
Fig. 11
1
Fig. 12
Fig. 13
2
3
4
5A - 49