Service Manual Cafitesse 100
Activating the programming mode
•
Remove the push button cover towards the
front by means of the dismounting tool.
•
Connect the Cafitesse programming adapter
to the service device and plug it into the jack
behind the upper push button on the
dispenser. (1, Fig. 1)
A packet of concentrate is not required
to be in the machine during
programming.
•
Switch on the dispenser and press the
activating button on the service device.
•
Switch off the dispenser.
After a few seconds:
Display on
service device:
•
The dispenser is equipped with EPROM
Version 2.9.
•
The dispenser is now in the programming
mode.
•
If there is no further programming, the
service device exits the programming mode
after approx. 25 sec.
Display on
service device:
•
To continue programming, switch on the
dispenser again.
07.2004
SATELLITE V2.9
#123456789012
- ERROR -
Values not saved
1
x x
Fig.1
Programming
x x
x
S T
O P
4 - 13