Douwe Egberts Cafitesse 100 Service Manual page 28

Service Manual Cafitesse 100
• Ensure that the thermostat (1) is turned
counterclockwise to zero (until stop) (Fig. 5).
CAUTION: If the thermostat is not turned
to zero, the dispenser will heat
and the capillary tube limiter
will be released.
• Dispensers designed to be operated with
208-240 V 60 Hz (USA/Canada) are
equipped with a voltage selector located on
the back panel of the dispenser (Fig. 6).
• Adjust the voltage selector (2) before
connecting the dispenser to adapt the
dispenser to the mains voltage (Fig. 6).
• For the adjustment loosen the fuse holder
and turn the adjusting bush (3) by means
of a screwdriver until the marking arrow
points to the correct voltage mark (Fig. 6).
2 - 14
Installation / Putting into Operation
1
Fig. 5
Fig. 6
3
2
07.2004