Service Manual Cafitesse 100
C.2.2 Disassembly of the Mixer and Mixer Motor
Preparation:
•
Disconnect the dispenser from the mains
supply and from the water supply.
•
Drain the water from the boiler.
•
Place a container underneath the outlet for
hot water and empty the residual water
from the tap.
WARNING:
There is the danger of being
scalded by hot water.
Disassembly of the mixer unit
•
Remove the shielding cover.
•
Press the bottom edge of the mixer support
(1) upwards and tilt the mixer unit (2)
towards the front (Fig. 1).
•
Withdraw the sieve housing (4). (Fig. 2)
•
Remove the mixing funnel towards the top
(1). (Fig. 2)
•
Turn the mixing container (5) to the right
and withdraw it towards the front. (Fig. 2)
WARNING:
There is the risk of being
injured by sharp plastic edges!
•
Remove the impeller (3) and the spacer
ring (2) towards the front. (Fig. 2)
5C - 4
Functions - Dosing System
2
Fig. 1
1
5
Fig. 2
1
2
3
4
07.2004