Carburetor Installation - Honda 2003 NPS50 Ruckus Service Manual

Install the throttle position sensor (page 1 7-9).
CARBU RETOR INSTALLATION
Coat a new D-ring with oil and i nstall it into the
i ntake manifold groove.
Install the intake manifold by tightening the bolts.
Install the insulator by aligning the groove of the
insulator with the tab of the intake manifold.
Tighten the insulator band screw.
Connect the water hose and remove the hose
clamp.
THROTTLE POSITION SENSOR
FUEL SYSTEM
6- 1 5