Front Wheel Removal; Front Wheel Inspection - Honda 2003 NPS50 Ruckus Service Manual

FRONT WHEEL
REMOVAL
Remove the adjusting nut and brake cable from the
joint pin and cable holder.
Remove the joint pin from the brake arm.
Disconnect the speedometer cable from the brake
panel by pushing the cable tab.
Remove the 0-ring from the speedometer cable.
Loosen the front axle nut.
Support the scooter securely using a hoist or equiv­
alent and raise the front wheel off the ground.
Remove the front axle nut.
Remove the front axle, side collar and front wheel.
Remove the brake panel from the left side of the
wheel.
Refer to page 14-1 1 for brake panel disassembly.
INSPECTION
AXLE
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.20 mm (0.008 in)
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
1 4-7