Front Wheel/Brake/Suspension/Steering Service Information; Front Wheel/Brake/Suspension/Steering Torque Values - Honda 2003 NPS50 Ruckus Service Manual

SERVICE I N FORMATION
GENERAL
•
•
Frequent inhalation of brake shoe dust, regardless of material composition could be hazardous to your health.
•
Avoid breathing dust particles.
•
Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
•
•
This section covers the front wheel, fork, handlebar, brake and steering.
When servicing the front wheel, fork or steering stem, support the motorcycle using a safety stand or hoist.
Use only tires marked "TUBELESS" and tubeless valve stems on rims marked "TUBELESS TIRE APPLICABLE".
Use genuine Honda replacement bolts and nuts for all suspension pivots and mounting points.
SPECIFICATIONS
ITEM
Minimum tire tread depth
Cold tire pressure
Axle runout
Wheel rim Radial
run out
Axial
Front brake lever free play
Brake
Brake drum J.D.
Brake lining thickness
Fork spring free length
TORQUE VALUES
Front axle nut
Front brake arm nut
Handlebar post nut
Steering stem top cone race
Steering stem lock nut
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
A CAUTIO N
175 kPa (1.75 kgf/cm', 25 psi)
10 - 20 (3/8 - 13/16)
I
95.0 (3.74)
I
3.5 (0.14)
128.5 (5.06)
44 N·m (4.5 kgf·m, 33 lbf . ft)
5.4 N·m (0.55 kgf·m, 4.0 l bf . ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
11 N·m (1.1 kgf·m, 8 lbf·ft)
69 N·m (7.0 kgf·m, 51 l bf·ft)
STANDARD
-
-
-
U-nut
U-nut
Unit" mm (in)
SERVICE LIMIT
0.8 (0.03)
0.20 (0.008) -
2.0 (0.08)
2.0 (0.08)
-
95.5 (3.76)
1.0 (0.04)
125.9 (4.96)
1 4-3