LIGHTS/METERS/SWITCHES
H EADLIGHTS
HEADLIGHT BULB REPLACEMENT
A halogen headlight bulb becomes very hot
while the headlight is on, and remains hot for a
while after it is turned off. To avoid being
burned, be sure to let it cool down before ser
vicing.
Disconnect the headlight 3P connector.
Remove the dust cover from the headlight.
Unhook the bulb retainer and replace the headlight ,--- -- -- -- -- -- -- -- -- --,
bulb with a new one.
NOTICE
Avoid touching a halogen headlight bulb. Finger
prints can create hot spots that can cause a bulb to
break.
If you touch the bulb with your bare hands, clean it
with a cloth moistened with alcohol to prevent it
from early fai l u re.
Install the bulb into the headlight and hook the bulb
retainer properly.
Install the dust cover properly to the headlight with
the "TOP" mark facing up.
Connect the headlight 3P connector.
NOTE:
•
INSPECTION
•
The headlights can turn on after starting the
engine.
Make sure that the fallowing items are normal
before this inspection.
- Sub fuse ( 1 DA)
- Starter relay operation (page 18-6)
- Dimmer switch (page 1 9-22)
1 9-4
A CAUTION
BULB
DUST COVER
"TOP" MARK
3P CONNECTOR
RETAINER