Handlebar Switches - Honda 2003 NPS50 Ruckus Service Manual

Disconnect the ignition switch 3P connector.
Remove the two screws and ignition switch.
Use the new screws and install the removed parts in
the reverse order of removal.

HANDLEBAR SWITCHES

Remove the front cover (page 3-6).
Disconnect the right handlebar switch 4P connector
and left handlebar switch 9P connector.
Check for continuity between the connector termi­
nals in each switch position.
Continuity should exist between the color code
wires as shown in the charts below.
LIGHTS/METERS/SWITCHES
1 9-2 1