Carburetor Removal - Honda 2003 NPS50 Ruckus Service Manual

CARBURETOR REMOVAL

Remove the floor step {page 3-7).
'05 model: Disconnect the vacuum piston hose and fuel hose
'03
�
from the carbu retor.
Pinch the carburetor water hoses with hose clamps
and disconnect the water hose.
Disconnect the throttle position sensor 3P and start­
ing enrichment (SE) valve 2P connectors.
Loosen the throttle cable lock nut.
Remove the throttle cable from the cable holder and
disconnect the throttle cable from the throttle drum.
Affer '05 model: Disconnect the vacuum piston hose and fuel hose r-
from the carburetor.
Pinch the carburetor water hoses with hose clamps
and disconnect the water hose.
Disconnect the throttle position sensor 3P and start­
ing enrichment (SE) valve 2P connectors.
Remove the harness clamp from the carburetor top.
Loosen the throttle cable lock nut.
Remove the throttle cable from the cable holder and
disconnect the throttle cable from the throttle drum.
THROTILE CABLE 2P CONNECTOR
FUEL HOSE
LOCK NUT WATER HOSE
VACUUM
PISTON HOSE
FUEL HOSE
FUEL SYSTEM
3P
CONNECTOR
2P CONNECTOR
3P
CONNECTOR
WATER HOSE
6-7