Steering Stem Removal - Honda 2003 NPS50 Ruckus Service Manual

Apply grease to the pivot screw sliding surface.
Connect the brake cable to the front brake lever.
Install the brake lever by tightening the pivot screw
and nut.
Install the dust cover.
Tighten the brake cable lock nut securely.
Route the wires I nstall the wire bands.
and cables properly. Install the rearview mirrors.
Connect the right and left handlebar switch 9P and
2P connectors.
Connect the front and rear brake light switch con­
nectors.
Install the turn signal indicator (page 1 9-10) and
connect the connectors.
Install the speedometer (page 1 9-1 1 ).
Adjust the front and rear brake lever free play (page
4-1 6).
Adjust the throttle grip free play (page 4-4).
STEERING STEM
REMOVAL
Remove the following:
- Front wheel (page 1 4-7)
- Fork (page 14-15)
- Handlebar (page 14-19)
Remove the bolts and front fender.
Remove the stem cover.
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
PIVOT NUT/SCREW
REARVIEW MIRRORS
STEM COVER
1 4-23