Float Level Inspection; Carburetor Installation - Honda NHSO aeroBO 1983 Shop Manual

Install the float valve, float and float pin.

FLOAT LEVEL INSPECTION

Measure the float level with the float tip just contact·
ing the float valve.
FLOAT LEVEL: 8.5 mm
(0.335
Adjust by carefully bending the float arm until the
float tip.
Check operation of the float and install the float
chamber.

CARBURETOR INSTALLATION

CAUTION:
Do not allow foreign particles to enter the
buretor.
Connect the control box and bystarter tubes to the
carburetor.
Install the carburetor and connect the fuel tube.
Install the frame center cover if it was removed.
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
in)
CONTROL BOX TUBE
car·
CARBURETOR
41
F U E L SYSTEM
BYSTARTER TUBE
FUEL TUBE
4 - 7