Carburetor Assembly - Honda 2003 NPS50 Ruckus Service Manual

FUEL SYSTEM

CARBURETOR ASSEMBLY

SPRING
JET NEEDLE
HOLDER
NEEDLE SPRING
---- -- -- -
JET NEEDLE
PILOT SCREW
FLOAT CHAMBER
Install the following:
Handle the jets with
care. They can
Slow jet
easily be scored or
- Needle jet
scratched.
- Main jet
Damage to the pilot Install the pilot screw and return it to its original
screw seat will position as noted during removal.
occur if the pilot Perform the pilot screw adjustment procedure if a
screw is tightened new pilot screw is installed (page 6-18).
against the seat.
Install the float and float valve i n the carburetor
body, then install the float pin through the body and
float.
6- 1 2
�
�
SET PLATE
SE VALVE COVER
NEEDLE JET
'
'
FLOAT VALVE
FLOAT VALVE
FLOAT
JET
FLOAT PIN