Fork Removal; Fork Disassembly - Honda 2003 NPS50 Ruckus Service Manual

FORK
REMOVAL
Remove the front wheel (page 1 4-7).
Remove the upper fork pinch bolt.
Loosen the lower fork pinch bolt and remove the
fork tube from the steering stem.
DISASSEMBL
Remove the fork cap and dust seal.
Clean the grease within the bottom case.
Press the fork tube into the bottom case and remove
the snap ring.
NOTICE
Be careful the fork tube does not pop out from the
spring pressure, when removing the snap ring.
Pull the fork tube out from the bottom case.
Remove the guide bushing and rebound spring
from the fork tube.
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
V
SNAP RING
REBOUND SPRING
GUIDE BUSHING ;
1 4- 1 5