LUBRICATION SYSTEM
Apply engine oil to a new oil seal lip and install it
into the stator base.
Coat a new D-ring with oil and install it into the sta
tor base.
Apply engine oil to the oil pump driven gear sliding
surface of the stator base.
Install the dowel pins into the crankcase.
Install the stator base on the crankcase and tighten ..,. .... .
the four bolts securely.
Install the following:
- Alternator/starter (page 1 2-5)
- Radiator (page 7-13)
Fill and bleed the cooling system (page 7-7).
After installation, fill the crankcase with the recom
mended engine oil (page 4-10) and check that there
are no oil leaks.
5-8