Installing And Setting Up; Site Requirements - Christie Cinema 2K-RBe Installation And Setup Manual

Table of Contents

Advertisement

Installing and setting up

Learn how to position and install the projector.

Site requirements

To safely install and operate the Cinema 2K-RBe projector, the installation location must meet these
minimum requirements.
Physical operating environment
Ambient temperature (operating) 10 to 35°C (50 to 95°F) up to 1000 m (3280.8 feet)
Humidity (non-condensing) 10% to 80%
Operating altitude 0 to 3000 meters (0 to 9843 feet) at 10 to 25°C (50 to77°F)
In China, the operating altitude is 0 to 2000 meters (0 to 6562 feet)
External exhaust ducting
Sufficient ventilation is required around the projector to regulate the temperature of the internal laser
module. If necessary, air intake and exhaust HVAC ducts can be installed.
An exhaust duct is also available for purchase as an optional accessory (P/N: 119-103105-XX).
Instructions for installing the exhaust duct are included with the accessory part.
The installation site must provide an airflow 250 cubic feet per minute (CFM) at 1 to 1000 meters
elevation, and must accommodate a heat load of 7166 BTU/hr.
For each additional 1000 meters above sea level, increase the airflow (CFM) value by 15%. If an
extraction duct is not used, the operating temperature range is restricted to 10 to 25°C (50 to 77°F)
at a maximum altitude of 3000 meters.
Permanent power connection
The projector light source requires the permanent AC connection to operate. There is also an available
connector for an uninterruptible power supply (UPS) to provide backup power for the projector
electronics only.
Certified wall breakers are required as part of the installation. Breakers must be part of the building
and easily accessible. The size of the breaker is determined from the power requirements of the
projector and can be up to 20A maximum for the main input and up to 10A maximum for the UPS
input.
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp2406-rbeCp2409-rbeCp2411-rbe

Table of Contents