Administrator Password Function; Setting The Administrator Password - Konica Minolta BIZHUB C3110 Service Manual

8. Service Mode functions
8.2

Administrator Password function

• This function is used when the administrator sets the administrator password. It also
allows a new administrator password to be set without requiring the entry of the currently
set administrator password. It is therefore used when the administrator forgets the
administrator password.
NOTE
• If the administrator password is temporarily changed by the service engineer,
never fail to have the administrator change the administrator password accord-
ingly.
8.2.1

Setting the administrator password

1. Call the Service Mode to the screen.
See P.4
2. Press the following keys in this order to display the SecurityServ. Mode screen:
Back → 2 → 2 → 2 → 0 → 0
3. Select [Admin. Password] and press the Select key.
4. Enter the default value "12345678" as the new password. Then, press the Select key.
NOTE
• Use the default value "12345678" as the password used only temporarily.
10
Security Function Ver. 1.01 Oct. 2014
[1 ]
A6DTS1E006DA
A6DTS1E007DA