Satellite Tracking; Position; Remaining Memory - ashtech Z-Xtreme Operations & Reference Manual

With this message displayed, press ↑ for less than two seconds. Every time you press
↑, the unit displays a different main menu in the following order:
• SYSINFO
• SURVEY: mode
• SURVCONF
• SESSIONS
• SETTINGS
If the display is in one of the submenus and you press the ↑ arrow button for more
than two seconds, the display returns to the top level parent menu. The receiver can
monitor activity while collecting data. The following paragraphs present step-by-step
instructions regarding access to important receiver status information such as:

Satellite Tracking

Position

Remaining Memory

Remaining Power
Satellite Tracking
If you wish to monitor the satellites that the receiver is tracking, perform the following
steps:
From the main menu, press ↑ < 2 seconds until
1.
(mode can be static, kinematic, or RTK Base).
2. With
SURVEY: MODE
3. Within the
SURVEY: MODE
appears on the screen.
4. With selected, press ↓ >2 seconds.
STATUS
5. Within the
STATUS
appears on the screen.
Position
If you wish to view the current position of the receiver, perform the following steps:
1. From the main menu, press ↑ < 2 seconds until
2. With
SURVEY: MODE
3. Within the
SURVEY: MODE
appears on the screen.
selected, press ↓ >2 seconds.
4. With
STATUS
5. Within the
STATUS
LAT:N/S**º**'**.*****" LON:E/W**º**'**.*****" ALT:*****.***
scrolls across the screen.
Remaining Memory
26
selected, press ↓ >2 seconds.
submenu, press ↑< 2 seconds repeatedly until
submenu, press ↑< 2 seconds repeatedly until
selected, press ↓ >2 seconds.
submenu, press ↑< 2 seconds repeatedly until
submenu, press ↑< 2 seconds repeatedly until
Z-Xtreme Operations and Reference Manual
is selected
SURVEY: MODE
STATUS
#USED:**
is selected.
SURVEY: MODE
STATUS