Cutting Media - Oce CS9160 User Manual

4.8.4 Cutting media

Be sure to read and understand the safety warnings before handling the printer.
Step 1 : Verify the following regarding the operational condition of the product.
•
The operation panel displays: "Ready to print".
Step 2 : If the roll media cut position is changed, refer to "Feeding media" and advance the roll media to
the desired cut position.
Step 3 : Open the front cover.
Step 4 : Place a razor blade on the media cut groove on the media guide, and cut the roll media.
1
•
Cutting roll media is complete.
Notes
•
When loading the new roll media, cut the front edge of the media if it is not straight.
2 3
N° Name
1 Media guide
2 Media cut groove
3 Razor blade
94
User's Guide Océ CS9160 printer
AP-40790 – Rev 2.0 -23/08/2011,