Oce CS9160 User Manual page 105

Step 10 : If foreign objects, such as dust or ink are attached to the print head, remove them using a
cleaning stick moistened with cleaning liquid.
Caution
•
When cleaning around the print head
Do not touch the nozzle of the print head to avoid damaging the print head.
o
Do not touch the head of the cleaning stick, oil on your hands may attach to the cleaning
o
stick, causing damage to the print head.
Do not immerse the head of the cleaning stick in water to avoid damaging the print head.
o
Do not reuse the cleaning stick; dust attached to the stick may damage the print head.
o
Step 11 : Close the left maintenance cover.
•
Close the cover firmly until it is locked.
Step 12 : Press the [ENTER] key.
•
The print head returns to its original position
• "CR Mainte.: Start" is displayed.
Step 13 : Press the [Cancel] key several times.
•
The printer enters the Normal mode
•
Cleaning around the print head is now complete.
2 1
4
N° Name
1 Print head
2 Head guide area
3 Nozzle
4 Dust, ink mass
105
User's Guide Océ CS9160 printer
2
3 4
AP-40790 – Rev 2.0 -23/08/2011,