Oce CS9160 User Manual page 51

Step 6 : Rewind the roll media a little by rolling the flange on the roll media holder while holding the edge
of the media, eliminate any slack or slant.
Notes
•
If you set the roll media free while rewinding, the roll media will fall out from the media feed slot
on the rear of the product.
•
Confirm that the right edge of the roll media does not go beyond the loading mark. If it does, it
may affect print quality.
Notes
•
When setting the roll media, set both sides of the media at least 5mm away from the edge of the
pressure roller. Slippage or creases may occur during printing.
5mm 5mm
N°
1 Roll media
2 Media loading mark
2
5mm
1
N°
1 Roll media
2 pressure rollers
51
User's Guide Océ CS9160 printer
Name
2
5mm
1
Name
AP-40790 – Rev 2.0 -23/08/2011,
2
1
1
2
1