Name Of The Parts And Functions; Front Section - Oce CS9160 User Manual

2.2 NAME OF THE PARTS AND FUNCTIONS

Be sure to read and understand the safety warnings before handling the printer.

2.2.1 Front section

7
6
11
9
8
5
4
N° Name
1 Media loading lever
2 Operation panel
3 Front cover
4 Stand
5 Media guide
6 platen
7 pressure rollers
8 Media cut groove
9 Maintenance cover
10 adjuster
11 Media retainers
10
Function
Used to fix or release the media.
Lower the lever to fix the media.
Lower the lever further to fix the media more firmly. Used to improve the
accuracy of media feeding.
Raise the lever to release the media.
Operation condition setting, printer display and various function settings are
performed.
Used to prevent that a user comes in contact with the driving mechanism during
the printer operation. Opened and closed when media is set or jammed. It is
normally closed.
To install the printer on a levelled floor.
Used to feed the media smoothly when the media is set or printed. The printer
has also an incorporated heater (after heater) to dry the ink.
Installed inside of the front cover.
The heater (platen heater) to dry ink is installed.
Installed inside of the front cover.
Press and hold the media when printing.
Installed inside of the front cover.
Used to cut media straight.
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
•
When cleaning the wiper.
•
When cleaning around the printer.
It is normally closed.
Used to install the printer horizontally
These media retainers will keep the media edges flat onto the printer. This to
prevent a crash of the moving print head with the media.
User's Guide Océ CS9160 printer
3 11
10
21 AP-40790 – Rev 2.0 -23/08/2011,
2
9
1
4