When You Cannot Generate Graphics In The Way You Want; Perform Head Cleaning - Oce CS9160 User Manual

Notes
• If an error not included in any items of this section occurs, contact your local OCÉ
representative.
Notes
•
If you want to receive product warranty, prepare the warranty certificate. If the warranty
certificate is not presented, the warranty will not cover the repair even if within the warranty
period.
•
If you have signed a maintenance service contract, prepare that or a similar document.
6.1 WHEN YOU CANNOT GENERATE GRAPHICS IN THE WAY
YOU WANT

6.1.1 Perform Head cleaning

If the nozzle check result indicates that the checked points are blurred or missing, clean the print head.
• Switch ON the printer and load the roll media.
Refer to: "Setting roll media"
Step 1 : Confirm that the printer functions normally and that the lever is lowered.
Step 2 : Press the [>] key to select the cleaning mode.
Step 3 : Press the [Cleaning] key for at least 2 seconds
•
Start head cleaning
• "cleaning **%" is displayed
• After the head cleaning is complete, the operation panel shifts back to normal.
User's Guide Océ CS9160 printer
116 AP-40790 – Rev 2.0 -23/08/2011,