Oce CS9160 User Manual page 52

Step 7 : If the edge of the roll media is set less than 5 mm from the edge of the pressure roller, follow the
procedure below to adjust the position of the roll media.
 Loosen the fixing levers of the right and left roll media holders, and move the roll media to left or
right.
 After moving the roll media, fix it with fixing levers of the right and left roll media holders.
Notes
• Press the holders to the printer to fix the roll media holders.
Step 8 : Lower the media loading lever
Notes
•
When loading the new roll media, cut the front edge of the media if it is not straight. Please refer
to "Cutting media".
•
When loading media that does not feed well, lower the media loading lever further.
1
3
4
1
N°
1
2
3
4
N°
1
3
Name
Roll media holder (Left)
Roll media holder (right)
Roll media
Fixing lever
Name
Media loading lever
52
User's Guide Océ CS9160 printer
2
3
4
2
1
AP-40790 – Rev 2.0 -23/08/2011,