Command Error Display And Remedies; Errors Requiring A Restart - Oce CS9160 User Manual

6.4.4 Command error display and remedies

A command error is displayed if a certain failure occurs during analysis of the command data sent from your
PC to the printer.
If a command error occurs, the following error message appears of the printer and the operation panel stops.
When the error is solved, the printer starts operating.
N°
1 MH** Error [ ]

6.4.5 Errors requiring a restart.

This section describes errors requiring restart and remedies.
An error requiring restart is displayed if a fatal operational failure such as the following occurs.
•
When an obstacle that prevents printing occurs
•
When a problem occurs with the electrical circuit, such as the PCB, motor and sensor of the printer.
•
When a failure in the printer control program occurs.
If an error requiring restart occurs, the printer stops operating after performing the following operations.
1. The drive power automatically shuts down
2. All lamps blink, and the buzzer rings continuously.
3. The error message is displayed.
Pressing any key on the operation panel stops the beeping.
For an error requiring a restart, operation will return to normal after removing the cause of the error and
restarting the printer.
If the same error continues to be displayed, contact your local OCÉ representative.
Be sure to tell us
•
"***" in the error message is the code N° that indicates what type of error occurred.
•
The command code representing the error occurred may be indicated in [ ]
• For the settings on your PC, refer to the operating manual of your
N° Display
1 E** Error [ ]
Notes
• "***" in the error message is the code n° that indicates what type of error occurred.
• The command code representing the error occurred is indicated in [ ]
• For the settings on your PC, refer to the operating manual of your PC.
Display
An invalid
command has
been sent from the
computer
Description
A problem that 1. Remove obstacles such as
does not have a
remedy has
occurred
2. Confirm that the replaced
3. Switch OFF the printer and
Description
Check that the
settings on your pc
and printer are the
same
Remedy
paper scraps in the drive
system.
items are correctly
attached.
switch it back ON after 10
seconds or longer
130
User's Guide Océ CS9160 printer
Remedy Reference
Menu setup on the
operation panel.
reference
The media is jammed.
Replacing consumable
components
AP-40790 – Rev 2.0 -23/08/2011,