4.3.6 Replacing roll media
(1) Replacement time
Be sure to read and understand the safety warnings before handling the printer.
Replace roll media if...
...the roll media runs out.
•
The operation panel displays "End of Roll".
•
If the media runs out during printing, the printer stops printing.
•
If you want to change the media type.
(2) Replacement steps
Notes
There are two optional winding systems available for the CS9160
Unwinder/Winder 100 (Only available as option in Europe/ROW)
o
Motorized winding system with tensioning (T winder) (Standard delivered in North America,
o
option in Europe/ROW)
•
Please refer to the User Guide of the chosen system to know how to correctly replace roll media
•
Refer to the pricing sheet for more details of these systems.
1. Remove the installed roll media.
Step 1 :
Verify that
•
the printer is ON,
•
the printer is in Normal mode, and NOT printing.
Step 2 :
Push the media hold lever backward (lever up).
N°
Name
1
Media loading lever
60
User's Guide Océ CS9160 printer
AP-40790 – Rev 2.0 -23/08/2011,
1