Adjust Print - Oce CS9160 User Manual

4.5 ADJUST PRINT

Notes
• This printer has been adjusted for optimum print quality before shipment at the factory.
•
Align the print head when the print quality decreases after the installation environment or the
media has been changed.
Be sure to read and understand the safety warnings before handling the printer.
Align the print head as described in the following procedure:
Step 1 : Switch ON the printer.
Step 2 : Load more than A3 size print media.
Step 3 : Confirm that the printer functions normally.
Step 4 : Press the [Menu] key.
Result:
•
The operation panel displays "Menu 1: Setup>".
•
Shifts to the Setup menu display.
Step 5 : Press the [>] key.
•
"Set1: MediaType" is displayed.
Step 6 : Press the [+] or [–] key to select the media type to use.
Step 7 : Press the [Enter] key.
•
"**>1: PrintMode" is displayed.
Step 8 : Press the [Enter] key.
•
"Mode: quality 1" will be displayed.
• The display shifts to the printing mode menu.
• Select the printing mode you want to use.
Step 9 : Press the [+] or [–] key to select "Adj.4: Bi-D Quality".
Step 10 : Press the [CANCEL] key several times.
•
The operation panel shifts back to normal.
•
Displays the adjustprint menu on the operation panel.
Step 11 : Press the [menu] key.
•
"Menu1:Setup>" is displayed on the operation panel
• The operation menu shifts to the setup menu display.
Step 12 : Press the [+] key or [-] key to select "Menu3: Adjust print"
Step 13 : Press the [>] key.
•
"Adj 1 Confirm" is displayed on the operation panel.
•
The display enters the adjustprint menu.
Step 14 : Press the [Enter] key.
User's Guide Océ CS9160 printer
68 AP-40790 – Rev 2.0 -23/08/2011,