Step 4 :
Press the [+] key or the [-] key to select Longstore or Head wash (depends on the firmware).
Step 5 :
Press the [ENTER] key.
•
Depending on your type printer, the operation panel displays:
"[Start Longstore ► E]" or "[Start Head Wash ►]".
Step 6 :
Press the [ENTER] key.
•
The longstore procedure starts.
Step 7 :
When the longstore procedure is finished, power off the printer.
3.5.3.1
Start up procedure after longstore.
Step 1 :
Power ON the printer.
•
The operation panel displays "Start ink charge ► E".
Step 2 :
Press the [ENTER] key and start the ink fill procedure.
User's Guide Océ CS9160 printer
40
AP-40790 – Rev 2.0 -23/08/2011,