Rear Section - Oce CS9160 User Manual

2.2.2 Rear section

1
7
8
N° Name
1 Roll media holders
2 Media feed slot
3 Ink cassette slot
4 Media guide
5 AC inlet
6 USB connector
Network interface
7
connector
8 Waste fluid tank
9 Waste fluid valve
Notes
There are two optional winding systems available for the CS9160
Unwinder/Winder 100 (Only available as an option in Europe/ROW)
o
Motorized winding system with tensioning (T winder) (Standard delivered in North America, option
o
in Europe/ROW)
•
Please refer to the User Guide of the chosen system to know how to correctly load media
• Refer to the pricing sheet for more details of these systems.
•
If you do not use one of the above winding systems. You have to use the scroller which is supplied with
the printer.
Be sure to read and understand the safety warnings before handling the printer.
3
5
Used to load the roll media.
Include flanges where roll media is attached, and the levers that fix the
roll media holders.
Used for feeding media
Insert the ink cassette
Used for smoothly feeding through media when the media is set or
printed.
The CS9160 printer also incorporates a pre-heater element to warm up
the installed media before printing.
Used to connect the power cables.
Not used for this printer
Connects a network interface cable.
Used to collect waste ink discharged from the printer.
Open and close when discharging the waste fluid from the waste fluid
tank. The default position is closed.
User's Guide Océ CS9160 printer
2 4
6 7 1
Function
22 AP-40790 – Rev 2.0 -23/08/2011,