Check 3print samples that are printed with Bi-D Normal pattern, and select the number that is not out of
alignment. "4" is selected in the next printing sample.
Step 22 : Press the [+] or the [-] key to enter the number that you selected in previous step.
Step 23 : Press the [ENTER] key.
•
The set value for BI-D Normal is registered.
•
The operation panel returns to Normal
Step 24 : Register the setting for BI-D Speed (Two way printing/Speed mode) in the same way as in the
previous steps
Step 25 : Press the [Cancel] key several times.
•
The operation panel returns to Normal
•
Alignment ends
User's Guide Océ CS9160 printer
119
AP-40790 – Rev 2.0 -23/08/2011,