Oce CS9160 User Manual page 69

•
A confirmation pattern for quality adjustment is printed.
•
After the confirmation pattern is printed, the operation panel displays "Adj.1: Confirm".
Step 15 : Check that the confirmation pattern printing result is as follows
•
When the printing result is
You do not need perform Alignment.
The procedure for the Alignment is now complete.
•
When the printing result is
You need to perform Alignment.
Register a setting for Bi-D Normal (two-way printing/normal mode).
Display the Adjust Print menu in the same way as previous steps.
Step 16 : Press the [+] key or [–] key to select "Adj.5: Bi-D Normal".
:
:
69
User's Guide Océ CS9160 printer
AP-40790 – Rev 2.0 -23/08/2011,