Roll Length Menu; Roll Media Length Menu; Head Wash Menu - Oce CS9160 User Manual

4.7.17

Roll Length menu

Setup Item
Roll media

4.7.17.1 Roll media Length menu

Setup Item Setting Value
1m to <30m> to 99m
Length
4.7.18

Head Wash menu

Notes
• Make sure to use the correct and genuine cleaning fluid.
Setup Item Setting Value
Start
Head Wash
Remove
cassettes
Setting Value
Roll Length is not used.
<OFF>
•
Roll1 Set up the roll media length.
The Roll Length setting can be set for "Roll1" to "Roll3".
•
Roll2
Roll3
•
—
Set the roll media length.
•
•
•
— •
Perform head cleaning.
•
[Enter] key:
Perform the head cleaning operation.
The operation panel displays the following contents.
Remove the ink cassette, and install the cleaning cassette.
Refer to: Replacing ink cassettes
•
[Cancel] key: Shift to the previous hierarchy without the head cleaning
— operation.
Refer to: Setup menu
[Enter] key: Save the setting and shift to the previous
hierarchy.
[Enter] key: Save the setting and shift to the next hierarchy.
Refer to: Roll length menu
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
Notes
When replacing the roll media, adjust the roll media
length again.
If the roll media length is not set, the residual quantity
of roll media will not be displayed correctly.
[Enter] key: Save the setting value and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
Description
87
User's Guide Océ CS9160 printer
Description
Description
AP-40790 – Rev 2.0 -23/08/2011,