Transfer And Transportation; Transferring The Printer - Oce CS9160 User Manual

Table of Contents

3.5 TRANSFER AND TRANSPORTATION

When using the dedicated stand, transfer the printer according to the procedure below.

Be sure to read and understand the safety warnings before handling the printer.

Pre-transfer steps

Step 1 :

Verify that the printer is OFF.

Step 2 :

Dispose the waste fluid

Step 3 :

Remove all the cables, such as the power cable

Step 4 :

Verify that the butterfly bolts attaching the stand with the printer, are well fixed.

Step 5 :

Verify that the printer head is in the rightmost position.

Step 6 :

Attach the protective material (metal plate) for attaching the head unit, and fix it with

thumbscrews.

Step 7 :

Open the right maintenance cover and the front cover

Step 8 :

Install the plastic bar while lifting the carriage.

Y rail

CR belt fixing

plate

Carriage fixing

shaft

N°

Head unit

Butterfly screw

Head unit fastening material (metal plate)

User's Guide Océ CS9160 printer

Name

AP-40790 – Rev 2.0 -23/08/2011,

Table of Contents

Table of Contents