Media-Related Troubleshooting - Oce CS9160 User Manual

6.3.3 Media-related troubleshooting

The media slips or is torn during initialization.
Notes
•
If the media is jammed or torn, remove it according to" when media is jammed"
N° Possible cause
1 Are you using the recommended media?
2 Is the loading position of the media correct?
Is the roll media set correctly?
3
Are there any foreign materials such as paper
4
attached to the pressure roller?
Is the printer being used in an environment
5 other than the one specified, such as in direct
sunlight?
Are you using folded, torn or rolled media?
6
Does the media bend?
7
The media is crumpled during initialization.
Notes
•
If the media is jammed or torn, remove it according to " when media is jammed"
N° Possible cause
Are you using the recommended media?
1
2 Is the loading position of the media correct?
3 Is the media loaded at an angle?
Are there any foreign materials such as paper
4
attached to the pressure roller?
Is the printer used in an environment other
5 than the one specified, such as near an air
conditioner?
Are you using folded, torn or rolled media?
6
User's Guide Océ CS9160 printer
remedy
Use the recommended
media.
Set the media correctly.
Set the roll media
correctly.
Clean the pressure roller.
Only use the printer in an
environment that is
specified for use.
Replace the media.
Use the recommended
media. When using
media other than the
dedicated one, set the
Vacuum Fan menu.
Remedy
Use the recommended
media.
Set the media correctly.
Set the media straight.
Clean the pressure roller.
Only use the printer in an
environment that is
specified for use.
Replace the media.
124
Reference
Setting roll media
Loading roll media
Cleaning the inside of the
printer
Installation manual
Cautions on handling
media"
Panel setup menu"
Reference
Setting roll media
Setting roll media
Cleaning the inside of
the printer
Installation manual
"Cautions on handling
media"
AP-40790 – Rev 2.0 -23/08/2011,