Replacing Roll Media - Oce CS9360 User Manual

6.1.2

Replacing Roll Media

(1) Replacement time
Replace the roll media when the following situation occurs.
a. When the roll media loaded in the printer runs out
"End Of Roll" is displayed.

If media runs out during printing, the printer stops printing.

b. When you want to change the media type to use
(2) Type
Please refer to our media guide on
(3) Replacing steps
Step 1: If the printer is switched ON, confirm that operation such as printing is not in progress.
Step 2: Raise the media loading lever.
N°.
1
www.mediaguide.oce.com
Media loading lever
6-112
Name
CS9360 User's Guide
1