Replacing Roll Media - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
NOTE
To install or remove the high capacity pack adapter to/from the ink pack and smart chip

card, refer to the operation manual included with high capacity pack adapter.
Step 10:
Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE
Make sure that the ink pack and smart chip are installed on the high capacity pack adapter

before inserting it to the slot. If the high capacity pack adapter is inserted into the slot
without the ink pack, the remaining information will be rewritten and the ink pack will not
be usable.
• Insert the high capacity pack adapter all the way to the end of the slot.
Step 11:
Confirm that the operation panel returns to Normal.
NOTE
If the high capacity pack adapter is replaced during a print job, the printer resumes

printing.
• Replacing the high capacity pack adapter is complete.
6.1.2

Replacing Roll Media

(1) Replacement time
Replace the roll media when the following situation occurs.
a. When the roll media loaded in the printer runs out
• "End Of Roll" is displayed on the operation panel.
• If media runs out during printing, the printer stops printing.
b. When you want to change the media type to use
(2) Type
TIP
Please refer to our media guide on

www.mediaguide.oce.com
6-145