Cautions On Handling Media; Precaution On Storing Media - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
4.1.2

Cautions on handling media

Note the following points when handling the media.
NOTE
Use recommended media under an appropriate environment.

The appropriate temperature and humidity for printing are as follows.
Guaranteed range of printing accuracy
Change rate
Do not use media which is folded, cut, or torn.

The size of media can change according to changes in humidity in the printing

environment. Before using media, leave media for 30 minutes in the printing environment
to adapt it to the environment.
Performing printing without adapting media to the printing environment may cause media
jams due to gaps or wrinkles in the media. Print quality is also affected.
When using the printer in a low-humidity environment, the cut media may stuck and may

not come down. In such a case, open the front cover after the media is cut to remove the
media.
Do not touch the print side. Moisture and oil on your hands may affect the print quality.

Do not leave media set in the printer for a long time.

Some media has a tendency to bend, causing media jams and degradation of print quality.
Avoid using such media especially in winter, in dry conditions, and when printing formal
documents.
Do not discard the individual box and bag. Use them for storing media.

4.1.3

Precaution on storing media

Note the following points on storing media.
NOTE
Avoid high temperature, high humidity, and direct sunlight when storing media.

After removing the unused roll media from the scroller, wind it properly. Then wrap it with

an individual bag and store it in an individual box.
Keep the media dry.

Temperature
22 C to 30 C
Within 2 C per hour Within 5 % per hour
4-71
Humidity
40% to 60%