4.3 HANDLING AND INSTALLING MEDIA
Notes
•
Refer to "General info on usable media" for details on media handling.
•
It is recommended to use tested and compatible media for this printer.
Refer to the following topics for types and details of media:
"General info on usable media"
o
4.3.1 Installing roll media
Notes
•
There are two optional winding systems available for the Océ CS9060
Unwinder/Winder 100
o
Motorized winding system with tensioning (T winder)
o
•
Please refer to the User Guide of the chosen system to know how to correctly load media
Refer to the pricing sheet for more details of these systems.
•
If you do not use one of the above winding systems. You have to use the scroller which is supplied with
the printer.
•
For media with a three inch core, three inch core adapters have to be used.
Notes
•
Set the roll media on a flat and levelled surface.
•
If the roll media and scroller are placed in a vertical position, the scroller might get damaged.
Notes
•
The following roll media can be attached to the scroller supplied with this unit.
Media tube diameter: three inches, outside diameter of media: 150mm or less, weight: 30kg or less.
o
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
46
AP-75770 – Rev 1.1 -19/11/2007,