Jobs Do Not Print; Job Takes Longer Than Expected To Print; Tray Linking Does Not Work - Lexmark X560n User Manual

Jobs do not print

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINTER IS READY TO PRINT
Make sure Select Function appears on the display or the Wake Up light is on before sending a job to print.
Press Wake Up to return the printer to Select Function.
C
HECK TO SEE IF THE PAPER TRAY IS EMPTY
Load paper in the tray.
M
AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED
•
Verify that you are using the correct printer software.
•
If you are using a USB port, make sure you are running Windows 98/ME, Windows 2000, Windows XP, or
Windows Server 2003 and using Windows 98/ME, Windows 2000, Windows XP, or Windows Server 2003
compatible printer software.
M
AKE SURE YOU ARE USING A RECOMMENDED
For more information, see the supplies section of the User's Guide, or contact the place where you bought the
printer.
M
AKE SURE PRINTER CABLES ARE SECURELY CONNECTED
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.

Job takes longer than expected to print

The job is too complex.
Reduce the complexity of your print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.

Tray linking does not work

Make sure to do all of the following:
•
Load both Tray 2 and Tray 3 with the same paper size and type.
•
From Print Properties, change the Paper source to Auto select.
•
Set Tray Switching to Nearest Size:
1
From the printer control panel, press System.
2
Press
3
Press
4
Press
Downloaded From ManualsPrinter.com Manuals
or repeatedly until Admin Menu appears, and then press OK.
or repeatedly until System Settings appears, and then press OK.
or repeatedly until Tray Switching appears, and then press OK.
USB,
PARALLEL
Troubleshooting
174
, E
OR THERNET CABLE