Replace Auto Sheet-Off Knife - MUTOH SC-PRO User Manual

Sign cutting plotter

Hide thumbs Also See for SC-PRO:

Table of Contents

3.1.3

Replace auto sheet-off knife

When you frequently use the auto-sheet-off utility, it is a good practice to regularly clean the knife and to

replace it when it starts to wear.

To replace the auto sheet-off knife, please follow the instructions mentioned below.

Step 1 :

Power OFF the unit and remove the power cable.

Step 2 :

Remove the 2 screws fixing the head cover.

Step 3 :

Higher the cutter cap (1) and swing it away (2). Do not loosen the spring.

Step 4 :

Remove the sheet-off knife (3).

Step 5 :

Clean the sheet-off knife, removing any material residues that might be clogged to the blade. In

case the blade is worn, reinstall a new knife.

Step 6 :

Place the (new) knife into the auto sheet-off assembly (4). Make sure the knife is correctly

oriented.

Step 7 :

Reinstall the cutter cap onto the auto sheet-off knife.

Step 8 :

Reinstall the head cover.

User's Guide SC-PRO Cutting Plotter

CHAPTER 3 : BASICS

AP-75280 – Rev. 1.1

Table of Contents