Table of Contents
Advertisement
4.1.1
SHEET OFF key
When a job has been finished and the media has to be sheeted off, this function can be used.
Notes
Please refer also to the "sheet off mode" and "sheet off margin" menu.
Step 1 :
Feed the media using the
Step 2 :
Press the [SHEET OFF] key.
Step 3 :
Press the [ ] key to start to sheet-off sequence or the [ ] key to cancel.
A U T O M A T I C
S H E E T - O F F ?
Y e s :
N o
:
Step 4 :
When selecting YES, the cutter will perform one of the following actions, depending on the sheet-
off settings.
a. When Sheet off mode is set to automatic, the media will be sheeted off near to the pressure
rollers.
b. When Sheet off mode is set to manual, the media will be fed toward the cutting groove.
The following message will be displayed:
m a n u a l l y c u t o f f
a k e y w h e n r e a d y
c. When Sheet off mode is set to disable, the media can not be sheeted off.
The following message will be displayed:
I S D I S A B L E D !
P r e s s a n y k e y
Step 5 :
The main screen will automatically be displayed when the sheeting off sequence has been
finished correctly.
Step 6 :
If the media has not been sheet-off (completely), the following message will be displayed:
S h e e t o f f p r o b l e m
d e t e c t e d
p r e s s a n y k e y
t o c o n t i n u e
keys to the desired position.
o r
o r
P l e a s e
a n d p r e s s
S H E E T - O F F
User's Guide SC-PRO Cutting Plotter
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
36
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
