Table of Contents
Advertisement
4 WALKTHROUGH THE OPERATION
The operation panel has been build up out of different keys as described in Chapter 2: "Product Overview -
Operation Panel".
Direct access keys
o
With these keys, it is possible to enter the frequently used menu items directly without the necessity
to go via the main menu.
Basic keys
o
With these keys, you can enter the main menu, move media and cutter head...
Special key combinations
o
With these combinations of keys, some features can be activated or de-activated.
Please find in the next coming chapters all information about these keys, menus, features...
This chapter is based on firmware version SP1.2.0 and keyboard version KB1.0.0
4.1 DIRECT KEY ACCESS
The following functions are directly accessible on the keyboard via the direct keys.
Note that these keys are only accessible when the display is in its start screen.
SHEET-OFF KEY
ORIGIN SET KEY
TEST KEY
COUNTOUR
CUTTING KEY
SPEED KEY
FORCE KEY
OFFSET KEY
TOOL KEY
To perform a sheet-off of the loaded media.
To set the origin.
To calibrate, align and test the EPOS system.
To set and start contour cutting.
To set the cutting speed (in cm/s).
To set the cutting force (in grams).
To set the offset of the knife.
To select a tool.
35
User's Guide SC-PRO Cutting Plotter
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
PANEL
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
