Page 1
► SC-Pro installation CD ► 2. Installation procedure Step 1 : Make a connection between the SC-Pro and your computer using a USB cable (standard in-the-box item). Step 2 : Power ON the cutter and computer. Step 3 : Your computer will automatically detect the cutter.
Page 2
Step 5 : Select [No, not this time] and press [Next]. Step 6 : Let windows automatically install the software. Press [NEXT] to continue. SC-PRO DRIVER INSTALLATION Page 2 of 8...
Page 3
Step 7 : Windows will search the hardware. Step 8 : When working with Windows XP, the following screen will be displayed. Ignore this message and press [Continue anyway]. SC-PRO DRIVER INSTALLATION Page 3 of 8...
Page 4
Step 9 : The software will be installed. Step 10 : The installation of the Mutoh SC-PRO cutter has been finished. SC-PRO DRIVER INSTALLATION Page 4 of 8...
Page 5
Step 11 : After the installation of the cutter itself, the USB serial port drivers has to be installed. Step 12 : Select [No, not this time] and press [Next]. Step 13 : Let windows automatically install the software. Press [NEXT] to continue. SC-PRO DRIVER INSTALLATION Page 5 of 8...
Page 6
Step 14 : Windows will search the hardware. Step 15 : When working with Windows XP, the following screen will be displayed. Ignore this message and press [Continue anyway]. SC-PRO DRIVER INSTALLATION Page 6 of 8...
Page 7
Step 16 : The software will be installed. Step 17 : The installation of the Mutoh SC-PRO USB drivers has been finished. Step 18 : If installation is completed successfully, the following text-balloon will pop up. SC-PRO DRIVER INSTALLATION Page 7 of 8...
Page 8
Step 19 : Check which COM port has been used for the SC-Pro USB communication: Open the control panel. ► Open system properties ► Open the device manager ► Unfold the Ports (COM&LPT) menu to know which COM port has been used.